The Guide to Assessment Validation and How to Validate Assessments

The Guide to Assessment Validation and How to Validate Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation are necessary.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.

It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.

Breaking Down the Two Types of Assessment Validation

Defining Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

Conducting Assessment Tool Validation

Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.

Ideal Times to Conduct Assessment Tool Validation

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated by you
- your new training products get added on scope
- your course gets reviewed against training product updates
- when learning resources are identified as a risk during your risk assessment

ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.

Identifying Training Products for Validation

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

What Do You Need for Assessment Tool Validation?

Teaching Materials

Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Team for Validation

Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

The members of your validation panel must collectively have:

Relevant vocational competencies and industry skills applicable to the unit being validated

Current knowledge and expertise in vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Inspect?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Core Rules of Evidence

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?

Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.

To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:

Lead by Example

Pay close attention to check here the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

changing diapers

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solids and feed babies

respond properly to infant signs and cues

prepare babies for sleep and soothe them

monitor and support physical exploration and gross motor skills appropriate for the age

Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Full Compliance or Not Competent

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?

Answers might include:

Necessary resources

Relevant costs

Activity length

Allocated roles and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolating, use of engineering controls, administrative controls

Structural hazards – substituting, isolation, engineering

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.